Navigation Data
Latitude
In the “Method of calculation” — select a Method of calculation depending on the type of the connected auxiliary equipment.
Possible Method of calculation options:
• GPS data. This Method of calculation is set up if the third-party terminal transmits the latitude from GPS data.
Longitude
In the “Method of calculation” — select a Method of calculation depending on the type of the connected auxiliary
equipment.
Possible Method of calculation options:
• GPS data. This Method of calculation is set up if the third-party terminal transmits the longitude from GPS data.
Speed
In the “Method of calculation” — select a Method of calculation depending on the type of connected auxiliary equipment.
Possible Method of calculation options:
• GPS data. This Method of calculation is set up if the third-party terminal transmits the speed value from GPS data.
• Always 0. This Method of calculation is set up if it is not required to control the VH speed, and Omnicomm Online software will record the VH speed value — 0.
Direction
In the “Method of calculation” — select a Method of calculation depending on the type of connected third-party
terminal.
Possible Method of calculation options:
• GPS data. This Method of calculation is set up if the third-party terminal transmits the direction of VH motion from GPS data.
• Always 0. This Method of calculation is set up if it is not required to control the direction of VH motion; Omnicomm Online software will not record the direction of the motion.
Number of Satellites
“Method of calculation” — select a Method of calculation depending on the type of connected third-party
terminal.
Possible Method of calculation options:
• GPS data. This Method of calculation is set up if the third-party terminal transmits the number of GPS satellites.
• Always 12. This Method of calculation is set up if it is not required to control the number of satellites; Omnicomm Online software will record the permanent presence of 12 satellites.
GPS Data Accuracy
In the “Method of calculation” — select a Method of calculation depending on the third-party terminal type.
Possible Method of calculation options:
• “GPS accuracy flag”. This Method of calculation is set up if the third-party terminal transmits information about the accuracy of GPS data. Omnicomm Online software will record accurate GPS data when receiving a respective event from the third-party terminal.
• The number of visible GPS satellites. This Method of calculation is set up if the third-party terminal transmits the number of GPS satellites. Omnicomm Online software will record accurate GPS data if the number of visible satellites exceeds three.
• Coordinates quality. This Method of calculation is set up if the third-party terminal transmits the VH coordinates. Omnicomm Online software will record accurate GPS data when receiving at least two coordinates from the third-party terminal.
• Always Accurate Data. This Method of calculation is set up if it is not required to control GPS data; Omnicomm Online software will always record accurate data.
Altitude
In the “Method of calculation” — select the Method of calculation depending on the type of connected third-party
terminal.
Possible Method of calculation options:
• GPS data. This Method of calculation is set up if the third-party terminal transmits the value of the VH position height by GPS data.
• Always 0. This Method of calculation is set up if it is not required to control the height of the VH position;
Omnicomm Online software will not display the direction of the motion.
