Appendix B. Required Equipment and Tools
Table 1:
| No. | Name | Quantity | IM Section | Note |
|---|---|---|---|---|
| Tools: | ||||
| 1 | Bimetal crown ø35 mm | 1 pce | 3.4 | |
| 2 | Shank for the crown | 1 pce | 3.4 | |
| 3 | Metal drill ø7 mm or ø4 mm | 1 pce | 3.4 | ø7 mm for rivets, ø4 mm for bolts |
| 4 | Measuring bar | 1 pce | 3.5 | The length not less than the length of the tank |
| 5 | Hacksaw | 1 pce | 3.5 | |
| 6 | Wrench (8 mm) | 1 pce | 3.5 | |
| 7 | Riveter | 1 pce | 3.5 | To install on rivets |
| 8 | Screw tap М5 with a holder | 1 pce | 3.5 | To install on bolts |
| Accessories: | ||||
| 9 | Protective seal | 2 pcs | 7.1 | +1 item for BIS 20240 |
| 10 | Sealing wire ø0.7 mm | under 0.8 m | 7.1 | |
| 11 | IBM Personal Computer, compatible with OS Windows XP | 1 pce | 3.6 | |
| 12 | Omnicomm Configurator | 1 pce | 3.6 | Produced by Omnicomm |
| 13 | UNU device (with a wire set) | 1 pce | 3.6 | Produced by Omnicomm |
| 14 | UNU USB device | 1 pce | 3.6 | Produced by Omnicomm |
| 15 | DC power supply unit (10–15) V, 0.5 A | 1 pce | 3.6 | Supplied together with UNU |
| 16 | Measuring container | 1 pce | 3.6 | height ≥L1 |
| 17 | Fuel | 1 pce | 3.6, 6 | |
| 18 | Calibration container | 1 pce | 6 | See section 6 for recommended volume |
| 19 | Silicone hermetic for external works | 100 g | Appendix E | To install on circular tanks |
