Omnicomm LLS-HD fuel level sensors (hereinafter referred to as the “sensor”) are designed to measure fuel level in vehicle tanks and stationary fuel tanks. Omnicomm LLS-HD fuel level sensors perform additional measurement of fuel temperature. Information exchange with the sensor is carried out through RS-232 and RS-485 interfaces.

The sensor is suitable for the following types of fuel: petrol, “summer” and “winter” types of diesel fuel, and other liquid petroleum, that maintain their aggregation state within the range of operating temperature.

Omnicomm LLS-HD fuel level sensors are available in different designs depending on the probe length: 2000 mm, 2500 mm, 3000 mm.

When cutting the measuring piece, the minimum cut-off length is 150 mm.