Appendix. List of required equipment
| № | Name | Number |
|---|---|---|
| 1 | Bimetal hole saw ø35 mm | 1 |
| 2 | Shank for the hole saw | 1 |
| 3 | Metal drill ø7 mm or ø4 mm | 1 |
| 4 | Hacksaw | 1 |
| 5 | Wrench 8 mm | 1 |
| 6 | Screw tap М5 with the holder | 1 |
| 7 | Rotor seal | 2 |
| 8 | Sealing wire ø0.7 mm | up to 0.8 m |
| 9 | Personal computer | 1 |
| 10 | Omnicomm Configurator Software | 1 |
| 11 | USB adapter Omnicomm USB-USB (или UNU) | 1 |
| 12 | D.C. Power supply unit 10–15 V, 0.5 A | 1 |
| 13 | Measuring tank | 1 |
| 14 | Fuel | |
| 15 | Tank for calibration | 1 |
