| Specification | Value |
| Measurement range, mm | 0…700, 1000, 1500, 2000, 2500, 3000 |
| Maximum permissible basic reduced measurement error of level, % | ±0.5 (when operating with the fuel used for calibration, or after filling the tank completely when changing the type of fuel) |
| Measurement output interface | RS-485 |
| Accelerometer | Available |
| Programmable interface data rate, bit/s | 1200, 2400, 4800, 7200, 9600, 14 400, 19 200, 38 400, 57 600, 115 200 |
| Output data protocol (auto protocol detection) | LLS, Modbus |
| Supply voltage, V | 7 – 75 |
| Power consumption, W | 0.4 |
| Current consumption, mA | 40 |
| Electrical strength of galvanic isolation, not less than, V | 2500 |
| Operating temperature range, °C | From –40 to +80 |
| Relative humidity at 25 °C (without condensation), % | From 5 to 95 |
| Atmospheric pressure, kPa | From 84 to 107 |
| Maximum relative humidity at 25 °C (without condensation), % | 100 |
| Enclosure protection rating | IP69k |
| Operating mode | Continuous |
| Internal filter range | 0 to 30 |
| Measurement period, s | 1 |
| Range of digital code corresponding to the maximum measured level | 1…4095 |
| Range of digital code corresponding to the minimum measured level | 0…4094 |
| Temperature measurement range, °C | From –40 to +80 |
| Overall dimensions, mm | 87.3 × 83.5 × (21 + length of the measuring section) |
| Sensor cable length, cm | 50 |
| Installation cable length, cm | 700 |
| Weight, kg | Not more than 2 |
| Service life, years | 8 |
