Data Transmission to a Communication Server
In the «Settings» tab select the «Connection» section from the list.
In the «Parameters of output for connection» section:
«Data submission period to CS» – enter the number of minutes, upon expiration of which the Terminal must establish connection with the communication server, while being in the mobile operator's home network. Recommended value – 10 min. Default value – 2 minutes.
In the «GSM and SMS communication parameters» section:
«SMS» – enable/disable the commands reception via SMS and sending the information messages by the Terminal. Default value — disabled. When the “SMS” parameter is enabled:
«SMS destination number» – enter the phone number, to which the SMS will be sent with information about the status of the Terminal and the vehicle.
«SMS template language» – select the language of the SMS template. Possible options: Russian, English, Portuguese, Spanish.
«Vehicle Name» – enter the name of the vehicle. The “Vehicle Name” field is mandatory.
In the «Roaming connection parameters» section:
Select the criterion for the connection of the terminal to the CS: “By time period” or “By packet size”. Default value — “Interval of sending data to the CS”.
«Interval of sending data to the server» – enter the number of minutes, upon expiration of which the terminal must establish connection with the communication server, while being in roaming. Recommended value – 180 minutes. Default value – 60 min.
«Data packet size to send to the CS» – enter the data packet size, upon achieving which the terminal must establish connection with the communication server, while being in roaming. Recommended value – 100 Kb.
In the «Roaming parameters» section:
«Roaming» – select the option of SIM card using while in roaming. Default value — allow. Possible options:
- «Permitted» – the terminal will transmit data using the available cellular networks
- «Prohibited» – the terminal will not transmit data while roaming
- «In roaming as at home network» – the terminal will transmit data following the same settings of output parameters as for the home network
- «According to the list» – the terminal will only transmit data using the cellular networks stated in the list. Enter the MCC and MNC of the required cellular networks in the table
When the terminal operates in roaming, the data transmission is carried out only to the communication server no. 1. To transfer data to two communication servers, select "In roaming as at home".
