Auto-Adjustment — enable this option to automatically correct measurements when the dielectric constant of the fuel changes. When auto-adjustment is enabled, level variations caused by fuel thermal expansion are also taken into account, meaning the displayed level will reflect the current temperature.

When using auto-adjustment, consider the following:

• For the Omnicomm LLS sensor to automatically correct its calibration values, the vehicle’s fuel tank must be completely filled during operation.
• When the fuel tank is fully filled, the maximum length of the sensor’s measuring part that remains above the fuel must not exceed 10 cm from the sensor flange.
• If the vehicle is operated with an insufficient fuel level in the tank, auto-adjustment cannot be performed.