SMS Commands
SMS commands for terminal management
| Command | Designation | |
|---|---|---|
| Command text in SMS | Reply to a command in SMS | |
| *SOUND 1# | SOUND ON | Request for turning on the siren |
| *SOUND 0# | SOUND OFF | Request for turning off the siren |
| *SETDOUT param# Param=0 Param=1 Param=0,1 | SETDOUT Possible parameter values: param = OK if the command is forwarded to execution param = ER if the command is not forwarded to execution | Request for disabling digital output |
| *GETIMG# | GETIMG param Possible parameter values: param = OK if the command is forwarded to execution param = ER if the command is not forwarded to execution | Request for taking picture (if the camera is connected) |
| *CLRDOUT param# Param=0 Param=1 Param=0,1 | CRLDOUT param Possible parameter values: param = OK if the command is forwarded to execution param = ER if the command is not forwarded to execution | Request for enabling digital output |
| *GETDOUT# | DOUT 0=1 1=0 где: output_number=output_state | Request for state of digital output |
| *CONNECT# | CONNECT CS_address:port | Request for establishing connection of Terminal with CS |
| *GETLINK# | LINK # LINK ip4_CS_address:port date_and_time | Request for status of connection to CS |
| *GETINFO# | INFO DID=deviceID HW=hardware_code_version BL=bootloader_version FW=firmware_version REC=number_of_records_in_archive IMEI=GSM_modem_unique_identifier | Request for state of terminal |
| *RESET# | RESET param Possible parameter values: param = OK if the command is forwarded to execution param = ER if the command is not forwarded to execution | Reset of terminal |
| *GETSTAT# | STAT terminal_date_and_time GPS=position as per GPS SPD=speed IGN=ignition_state L1=fuel_level:sensor_state L6=fuel_level:sensor_state Fuel level sensor state codes LLS/ • 0 - disabled; • 1 - not ready; • 2 - ready, , frequency 20 - max Hz; • 3 - error, frequency 0 - 19 Hz; | Request for vehicle state |
| *SETPWDID vid pwdid# vid - identification of Terminal; pwdid - password/identification. | SETPWDID ERRID/ERRNulPWD/ERRAlrSet/PWD:pwdid OK | Setting parameter “Password” |
| *CONNECTSC# | CONNECT SC | Request for connection of terminal with configurator server |
| *SETAPN apn# apn - APN of the operator | SETAPN apn ERR/OK | Setting APN |
| *SETAPN2 apn# apn - APN of the operator of second SIM card | SETAPN apn ERR/OK | Setting APN for second SIM card |
| *GPSCOLD# | GPSCOLD ERR/OK | Cold start of GPS reciever |
| *UNBLOCK# | Unblocking the terminal | |
