In the “Settings” tab select the “Connection” section from the list.

In the “Parameters of output for connection” section:

“Interval of sending data to the server” – enter the number of minutes, upon expiration of which the terminal must establish connection with the communication server, while being in the mobile operator's home network. Recommended value – 10 minutes.

In the “Communication parameters of GSM and SMS” section:

“SMS” – enable/disable the commands reception via SMS and sending the information messages by the Terminal.

“SMS destination number” – enter the phone number, to which the SMS will be sent with information about the status of the Terminal and the vehicle.

“SMS template language” – select the language of the SMS template. Possible options: Russian, English, Portuguese, Spanish.

“Vehicle Name” – enter the name of the vehicle. The “Vehicle Name” field is mandatory.

In the “Output parameters to communicate in roaming” section:

Select the criterion for the terminal connection to the CS: “By time period” or “By packet size”.

“Interval of sending data to the CS” – enter the number of minutes, upon expiration of which the terminal must establish connection with the communication server, while being in roaming. Recommended value – 180 minutes.

“Data packet size to send to CS” – enter the data batch size, upon achieving which the terminal must establish connection with the communication server, while being in roaming. Recommended value – 100 Kb.

In the “Roaming settings” section:

“Roaming” – select the option of SIM card using while in roaming. Possible options: “Permitted”, “Forbidden” or “According to the List”.

• “Permitted” – the terminal will transmit data via available cellular networks
• “Forbidden” – the terminal will not transmit data, while being in roaming
• “Always in a home network” – the terminal will transmit data as set up for connection to the CS in a home network
• “According to the List” – the terminal will only transmit data via the cellular networks provided in the list. Enter the MCC and MNC of required cellular networks in the table.