GSM availability
In the section “GSM connection availability”:
The method of calculation options is given in descending order of priority, so that the first option is the top priority.
In the field “Method of calculation”, select the parameter based on which Omnicomm Online software will record the availability of GSM connection.
Possible values depending on the type of terminal being connected:
• “Always-on connection”. This Method of calculation is a default value or is set up if it is not required to control GSM connection availability. Omnicomm Online software will display permanent availability of GSM connection.
• Flag “GSM connection”. This Method of calculation is set up if the third-party terminal transmits information about the availability of GSM connection. Omnicomm Online software will record the availability of GSM connection when receiving the event of GSM connection availability from the terminal.
• GSM signal strength. This Method of calculation is set up if the third-party terminal transmits signal receive level data. Omnicomm Online software will record the availability of GSM connection when receiving signal receive level values exceeding 0 from the third-party terminal.
