1. Select a VH
2. Press the button “Add report” and select “Refrigerator Operation”

In the program window will display the report on operation of the current refrigerator state.

Press on the icon and select information for review:

The report contains the following information:

• iQFreeze name – iQFreeze name in the Bluetooth network
• Serial number – iQFreeze serial number
• Firmware version – iQFreeze firmware version
• Connection with CHU – availability of connection with cooling and heating unit. Possible options: “No connection”, “Connection available”
• Data actuality – the date and time of raw data received from iQFreeze
• Installation type – CHU type. Possible options: ThermoKing SLX, Carrier Supra/Maxima, Zanotti, ThermalMaster 5100/8100, Carrier Vector 1850
• System serial number – CHU serial number
• Number of errors – number of CHU errors
• CHU temperature – actual temperature in the CHU section. Possible values: from -128.00 to +128.00
• Set temperature – set-point temperature in the CHU section. Possible values: from -128.00 to +128.00
• CHU temperature section 2 (3) – actual temperature in section 2 (3). Possible values: from -128.00 to +128.00
• Set-point temperature section 2 (3) – set-point temperature in section 2 (3). Possible values: from -128.00 to +128.00
• Door status – status of the CHU door. Possible options: open, closed
• Coolant temperature – CHU coolant temperature. Possible values: from -128.00 to +128.00
• Engine RPM – status of the CHU engine RPM. Possible options: stop, low, high
• Compressor configuration – configuration of the CHU compressor. Possible options: Start/Stop, Continuous
• System status – CHU system status. Possible options: stop, heating, cooling, defrosting
• Battery voltage – CHU battery voltage. Possible values: from 0.00 to +99.00
• Ambient air temperature – CHU ambient air temperature. Possible values: from -128.00 to +128.00
• Engine hours – Engine hours of CHU from the engine. Possible values: from 0.00 to 1000000.00