Select one or several VH for which it is required to control the maintenance, press the right mouse button and select “Maintenance schedule”:

Click the right mouse button and select “Create new maintenance task”:

“VH” select a VH, for which it is necessary to add a task for maintenance.

“VH name” enter a name of maintenance.

“Scheduled maintenance”, switch it on, if automatic generation of task for maintenance service with the set intervals after their performance.

“Maintenance description”, enter description of works to be performed during maintenance.

“Time” is time of switching on/off control over performance of maintenance by date.

With switched on control over maintenance performance date:

• “Maintenance service due date”, select a date for maintenance service performance. Allowed values: from 01/01/2000 to 31/12/2030
• “Period”, set a number of days or months between maintenance services for automatic generation of a next maintenance task. It applies to periodic maintenance service only.
• “Remind before”, specify in how many days before the maintenance service date, the notification shall be generated and the maintenace task shall be selected in the list.

For notifications generation it is required to add a notification on event “Maintenance is expected”. “Mileage” is switching on/off control over performance of maintenance service by mileage. Switching on control over mileage is allowed only with the set initial parameters for control over maintenance service in the VH profile.

With switched on control over VH mileage before the maintenance service:

• “Time before the next maintenance service by mileage, km”, select a value of VH mileage upon reaching of which it is required to get VH maintenance service performed. Allowed values: from 1 to 10.000.000.

• “Period”, set a number of kilometers between maintenance services for automatic generation of a next maintenance task. It applies to periodic maintenance service only.

• “Remind before”, specify in how many kilometers before the mileage value of maintenance service, the notification shall be generated and the maintenace task shall be selected in the list.

For notifications generation it is required to add a notification on event “Maintenance is expected”.

“Engine hours” is time of switching on/off control over performance of maintenance by number of engine hours. Switching on control over engine hours is allowed only with set initial parameters for control over maintenance service in the VH profile.

With switched on control over VH engine hours before the maintenance service:

• “Due date of the next maintenance service, eoh”, set a number of the VH engine hours upon reaching of which it is required to get the VH maintenance service performed. Allowed values: from 1 to 10.000.000.
• “Period”, set a number of engine hours between maintenance services for automatic generation of a next maintenance task. It applies to periodic maintenance service only.
• “Remind before”, specify in how many engine hours before the achiebement of the value of the next maintenance service, the notification shall be generated and the maintenace task shall be selected in the list.

For notifications generation it is required to add a notification on event “Maintenance is expected”.